- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Системы автоматизации
- Системы визуализации SIMATIC HMI
- Системы идентификации
- Промышленные коммуникации SIMATIC NET
- Промышленные аппараты управления SIRIUS
- Промышленные информационные технологии
- Управление на базе РС
- Системы управления процессом
- Контрольно-измерительные приборы
- Анализаторы процесса
- Блоки питания SITOP
- Продукты для специальных требований
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
Switched-mode power supply
- Заказные данные (1)
- Информационные материалы
Информационные материалы
The SIDOOR NT40 switch mode power supply is operated with 230 V AC (± 15 %), 50/60 Hz, to power the following SIDOOR door controllers:
- SIDOOR AT40 and SIDOOR ATD400V Elevator Door Drives
- SIDOOR ATD400K Cold Room Gate Drives
- SIDOOR ATD4xxW Machine Tool Door Drives
It is especially suitable for door systems with high door weights.
On the output side, the power supply unit delivers a voltage of 36 V DC (± 3 %) SELV at a rated output power of < 100 W.
In order to enable fast acceleration/deceleration of the doors by the controller, the device can briefly (< 2 s) deliver a current of 15 A (corresponds to a short-time power output of 540 W).
Технические данные
Order number
6FB1112-0AT20-3PS0
SIDOOR NT40
General information
Product brand name
SIDOOR
Product designation
Switched-mode power supply
Product version
NT40
Installation type/mounting
Mounting type
Four 5 mm screws
Supply voltage
relative symmetrical tolerance of the supply voltage
15 %
Input current
Current consumption for 2 s, max.
3.5 A
Operational current of fuse protection at input, min.
6 A
Operational current of fuse protection at input, max.
10 A
Tripping characteristic class of fuse protection at input
B
Output voltage
Rated value (DC)
36 V; SELV
Relative symmetrical tolerance of the output voltage
3 %
Output current
Rated value, min.
0 A
Rated value, max.
2.5 A
Temporary overload current (for 2 s maximum)
15 A
Power
Active apparent power, max.
650 V·A
Emitted active power, max.
100 W
Emitted active power (restricted to 2 s)
540 W
Efficiency at 230 V AC (with 100 W emitted active power)
90 %
Isolation
Overvoltage category
2
Degree and class of protection
IP degree of protection
IP54
Equipment protection class
I
Standards, approvals, certificates
Standard for EMC
EMC Directive 2004/108/EC, EN 12015, EN 12016
Standard for safety
EN 60950-1:2006
Ambient conditions
Ambient temperature during operation
● min.
-20 °C
● max.
55 °C
● Remark
No direct exposure to the sun
Ambient temperature during storage/transportation
● Storage, min.
-20 °C
● Storage, max.
70 °C
● Transportation, min.
-40 °C
● Transportation, max.
70 °C
Air pressure acc. to IEC 60068-2-13
● Installation altitude above sea level, max.
2 000 m
Relative humidity
● No condensation, min.
10 %
● No condensation, max.
93 %
Cables
Cable length
● Input side
2 m
● Output side
1.5 m
Connection method
Design of electrical connection at input
SCHUKO connector DIN 49.441, CEE7/VII
Design of electrical connection at output
WAGO 721-103/026
Dimensions
Width
270 mm
Height
55 mm
Depth
80 mm
Дальнейшая информация
For more product details see System Manual "SIDOOR AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ADT400T", http://support.automation.siemens.com/WW/view/en/58531074.