SIPLUS central processing units

Standard CPUs for SIPLUS ET 200SP:

SIPLUS CPU 1510SP-1 PN
SIPLUS CPU 1512SP-1 PN

Characteristics	SIPLUS CPU 1510SP-1 PN	SIPLUS CPU 1512SP-1 PN
Work memory for program, integrated	100 KB	200 KB
Work memory for data, integrated	750 KB	1.0 MB
Load memory	Plug-in via SIMATIC Memory Card	Plug-in via SIMATIC Memory Card
Command execution times
Bit operations	0.072 µs	0.048 µs
Word operations	0.086 µs	0.058 µs
Fixed-point operations	0.115 µs	0.077 µs
Bit memories, timers, counters
S7 counters/timers	2048 each	2048 each
IEC counter	any number (only limited by the work memory)	any number (only limited by the work memory)
IEC timer	any number (only limited by the work memory)	any number (only limited by the work memory)
Bit memory	16 KB	16 KB
I/O address range
Inputs	32 KB (all inputs are stored in the process image)	32 KB (all inputs are stored in the process image)
Outputs	32 KB (all outputs are stored in the process image)	32 KB (all outputs are stored in the process image)
Motion
No. of axes	Up to 6	Up to 6
Communication
PtP	Yes (via CM)	Yes (via CM)
PROFINET IO	1 x PN IO IRT (3-port switch)	1 x PN IO IRT (3-port switch)
PROFIBUS DP	Yes (via CM DP)	Yes (via CM DP)
Web server	Yes	Yes

Fail-safe CPUs for SIPLUS ET 200SP:

SIPLUS CPU 1510SP F-1 PN
SIPLUS CPU 1512SP F-1 PN

Characteristics	SIPLUS CPU 1510SP F-1 PN	SIPLUS CPU 1512SP F-1 PN
Work memory for program, integrated	150 KB	300 KB
Work memory for data, integrated	750 KB	1 MB
Load memory	Plug-in via SIMATIC memory card, max. 32 GB	Plug-in via SIMATIC memory card, max. 32 GB
Command execution times
Bit operations	72 ns	48 ns
Word operations	86 ns	58 ns
Fixed-point operations	115 ns	77 ns
Floating-point operations	461 ns	307 ns
Integral interfaces
PROFINET IO IRT	1 x PN IO IRT (3-port switch)	1 x PN IO IRT (3-port switch)
PROFIBUS DP	Yes (via CM DP)	Yes (via CM DP)
Standards, approvals, certificates	SIL according to IEC 61508: to SIL3 in each case PL according to ISO 13849: to PLe in each case	SIL according to IEC 61508: to SIL3 in each case PL according to ISO 13849: to PLe in each case

Область применения

Various CPUs with graduated levels of performance are available for the ET 200SP:

Standard CPUs

SIPLUS CPU 1510-1 PN:
for smaller applications with medium requirements regarding the program scope and processing speed, for distributed setup via PROFINET IO or PROFIBUS DP.
SIPLUS CPU 1512-1 PN:
for applications with medium requirements regarding the program scope and processing speed, for distributed setup via PROFINET IO or PROFIBUS DP.

Fail-safe CPUs

SIPLUS CPU 1510SP F-1 PN:
The entry-level CPU for standard and fail-safe applications with medium requirements in terms of processing performance and response speed in discrete production technology. The SIPLUS CPU 1510SP F-1 PN can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device).
SIPLUS CPU 1512SP F-1 PN:
The CPU for standard and fail-safe applications with medium requirements in terms of processing performance and response speed in discrete production technology. The SIPLUS CPU 1512SP F-1 PN can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device).

Дизайн

All CPUs have a rugged, compact enclosure.

The front of the controller contains:

LEDs to indicate status and errors
Mode switch
24 V DC connection

The CPUs also include:

a slot for the SIMATIC Memory Card;
Note: A SIMATIC Micro Memory Card is essential for the operation of the SIPLUS ET 200SP CPU.
Connection for PROFINET IO IRT (3-port switch)
- Port 1 and 2 via a BusAdapter
- Port 3 permanently integrated in the CPU
Connection for PROFIBUS DP via an optional CM DP communication module

Функции

Performance
- Fast command processing, depending on the CPU type, language extensions and new data types
- High-performance network connection:
  via PROFINET IO IRT.
Integrated technology
- Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
- Support of speed-controlled and positioning axes as well as external encoders
- Precise position gearing for synchronous operation between axes
- Trace functions for all CPU tags, both for diagnostics in real time as well as for sporadic error detection
- Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
Isochronous mode
- Synchronous coupling of distributed signal acquisition, signal transmission, and program execution to the PROFINET cycle with constant bus cycle time
Security Integrated
- Password-based know-how protection against unauthorized read-out and modification of program blocks
- Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
- 4-level authorization concept:
  Communication to the HMI devices can also be restricted.
- Manipulation protection:
  The controller recognizes changed or unauthorized transmissions of the engineering data.
Integrated system diagnostics
- System diagnostics information is displayed consistently and in plain text in the TIA Portal, HMI devices and Web server, even for messages from the drives, and is updated even if the CPU is in STOP mode.
- Integrated into the firmware of the CPU, no special configuration is required
Configuration control (option handling) in central setup
- Different hardware configurations can be stored in the controller:
  Modification of the configuration in the user program (startup OB100)
  Retrofitting of options at end of configuration
  Use of placeholder modules is possible.
SIMATIC Memory Card (required for operation of the CPU)
- Used as a plug-in load memory or for updating the firmware.
- Also for storing additional documents or csv files (for recipes and archives)
- Creation of data blocks for storage/reading of data via SFCs of the user program
Datalog (archives) and recipes
- Storage of csv files for recipes and archives on the SIMATIC Memory Card;
  easy access to plant-relevant operating data using Office tools or via a Web server
- Easy access to machine configuration data by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
Programming
- Programming with STEP 7 Professional, V13 update 3 and higher

Дальнейшая информация

Further information and downloads

Manuals

The manuals for ET 200SP can be downloaded online for free (SIMATIC Customer Support).
http://support.automation.siemens.com/WW/view/en/84133942

General information

http://www.siemens.com/et200sp

SIMATIC Selection Tool

http://www.siemens.com/tia-selection-tool

Brochures

Information material for downloading can be found on the Internet:

http://www.siemens.com/simatic/printmaterial