Integrate for engineering

The product suite for optimal adaptation of the SINUMERIK to the machine tool

Machine tool manufacturers want to expand the technological functionality of intelligent machines, and to adapt the operation of the machine optimally to its technology. Siemens has the answer to these requirements with the SINUMERIK Integrate for engineering product suite.

The scope of functions of the SINUMERIK NCU can be expanded with compile cycles. A range of standard compile cycles is available for this purpose. Possibilities have been created to support, for example, special kinematics and special compensations. SINUMERIK Integrate Create MyCC supports the creation of manufacturer-specific NCK functions.

The openness in the HMI enables full access to all relevant data of the SINUMERIK NCU, PLC and drives. The operation of SINUMERIK Operate can be adapted in different ways:

By configuring prepared screen forms, such as SINUMERIK Integrate Create MyHMI /PRO
By configuring with standard tools, such as SINUMERIK Integrate Create MyHMI /WinCC
By programming based on C++, .Net or Qt with SINUMERIK Integrate Create MyHMI /3GL

Remote data access is possible via the OPC UA protocol with SINUMERIK Integrate Access MyMachine /OPC UA.

Extensive support for commissioning is offered by, e.g., SINUMERIK Integrate Create MyConfig, SINUMERIK Integrate Access MyMachine /P2P, SinuCom or SIMATIC STEP 7.

The SINUMERIK Integrate Run MyRobot product suite offers optimal integration of robots in machines for handling or machining tasks.

SINUMERIK Integrate Run MyVNCK offers user-side support – the link to a virtual NC kernel in a CAM system. You can protect the technological know-how of your cycles with SINUMERIK Integrate Lock MyCycles.

SINUMERIK Integrate for engineering


Implement HMI functions	Create MyHMI (Run MyHMI)
Master computer interface with OPC UA	Access MyMachine /OPC UA
Access protection for cycles	Lock MyCycles
Implement NCK functions	Create MyCC (Run MyCC)
Integrate robots	Run MyRobot
Integrate CNC simulation in the CAM system	Run MyVNCK
Commissioning modular machines	Create MyConfig
Perform commissioning and remote maintenance	Access MyMachine /P2P
Commissioning and service tools	SinuCom
Service functions	SIMATIC STEP 7 for SINUMERIK hardware

Дальнейшая информация

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit

http://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under