SIMOTICS TN Series H-compact

• Информационные материалы

  Информационные материалы

  SIMOTICS TN Series H-compact

  Maximum power - minimum size – especially for converter operation

  General description

  The increasing significance of energy-saving, environmental legislation, the desire for even smaller dimensions and the demands of domestic and international markets have led to the further development of the H-compact series that has proven itself over the years.

  SIMOTICS TN Series H-compact motors are used in the widest range of industry sectors - such as oil & gas, paper, chemical industry or steel. In these sectors, they are used to drive compressors, blowers, refiners, crushers and air separation systems. .

  Область применения

  Typical applications

  • Compressors
  • Fans
  • Blowers
  • Pumps
  • Conveyor systems

  Особенности

  Customer benefits

  • Optimum efficiency and therefore lower operating costs.
  • High power density and compact design result in a lower space requirement and lower weight.
  • Additional advantages include the reliable bearing design as well as rotors with copper cage for a high degree of reliability and low additional losses (exception: aluminium die-cast cage for shaft height 450, 4- to 8-pole)
  • The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs.
  • The MICALASTIC insulation with VPI impregnation (thermal class 155, previously temperature class F) guarantees a high degree of reliability and a long lifetime. 
  • Approved Durignit IR 2000 insulation system for shaft height 450, 4- to 8-pole.

  Технические данные

  Technical data overview

  Brief overview
  Force-ventilated motors:	1000 kW … 2500 kW
  Water-cooled motors:	1300 kW …1700 kW
  Shaft heights:	450, 500, 560, 630 mm
  No. of poles:	2 ... 8
  Rated voltage:	690 V
  Operation:	Converter-fed operation
  Degree of protection:	IP55
  Cooling type:	IC411, IC416, IC71W
  Type of construction:	IM B3, IM V1
  Bearings:	Roller bearings, sleeve bearings
  Regulations/Standards:	IEC, EN, DIN, VDE
  Explosion protection:	Non sparking, Zone 2, II 3 G Ex nA II C T3 Gc