- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Системы автоматизации
- Системы визуализации SIMATIC HMI
- Системы идентификации
- Промышленные коммуникации SIMATIC NET
- Промышленные аппараты управления SIRIUS
- Промышленные информационные технологии
- Управление на базе РС
- Системы управления процессом
- Контрольно-измерительные приборы
- Анализаторы процесса
- Блоки питания SITOP
- Продукты для специальных требований
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
- Информационные материалы
Информационные материалы
SICLOCK DCFRS wireless receiver (without antenna base)
SICLOCK DCFRS wireless receivers receive signals from the DCF77 time signal transmitter. The DCF77 transmitter is located in Mainflingen near Frankfurt am Main and transmits long-wave signals at a frequency of 77.5 kHz. Under good reception conditions, signals can be received within a radius of up to 1 500 km of the transmitter location.
Unlike devices that receive signals from satellites, the SICLOCK DCFRS can also be used inside buildings. SICLOCK DCF77 wireless receivers output the demodulated DCF77 time signal.
SICLOCK DCF77 wireless receivers are available in two versions:
- SICLOCK DCFRS with TTY interface (20 mA current interface) for direct connection to central plant clocks
- SICLOCK DCFRS with RS 232 signal level for connection to PCs
Note:
We recommend the software DCF77 receiving service (Article No. 2XV9450‑1AR28) if the RS 232 version is used, see "Accessories". Parameter assignment is not necessary for both receiver versions.
Технические данные
Order number
2XV9450-1AR06
2XV9450-1AR16
product brand name
SICLOCK
Product type designation
DCFRS radio clock RS232
DCFRS radio clock TTY
General technical data:
Type of signal
DCF77
Electrical input frequency of the antenna
kHz
77.5
Time deviation relating to master clock maximum
µs
1 000
Number of interfaces as output acc. to RS 232
1
1
Cable length of connecting cable
m
20
Type of electrical connection for connecting cable
2 x 1 mm² shielded
Type of voltage supply
External
via basic unit
Protection class IP
IP65
Number of interfaces as output acc. to 20 mA (TTY)
1
1
Ambient temperature during operation
°C
50 ... -10
Installation/ mounting/ dimensions:
Mounting type
Stainless steel support
Outdoor installation
Width of the antenna head
mm
185
Height of the antenna head
mm
80
Depth of the antenna head
mm
65
Дальнейшая информация
For further product details, refer to the
- "SICLOCK DCFRS for WinCC (RS232 Interface)" operating instructions http://support.automation.siemens.com/WW/view/en/73996739
- "SICLOCK DCFRS Industrial Version with TTY Interface" operating instructions http://support.automation.siemens.com/WW/view/en/73996895
