Analyze MyCondition

• Заказные данные
  (6)
• Информационные материалы

  Информационные материалы

  SINUMERIK Integrate for production Analyze MyCondition provides test cycles for equability axis tests, for universal axis tests, and for performing circularity tests, and also offers functionality for individual acquisition of CNC data.

  It also supports the reporting of parameters about wear of mechatronic components. By employing a condition-oriented maintenance routine, you will keep your machines running longer as well as reduce downtimes and outages.

  By means of standardized test procedures, Analyze MyCondition helps machine operators, maintenance technicians and service engineers to determine the machine condition and monitor the wear on the machine over time. Through continuous evaluation of the condition of the machine tools, trends can be detected early and measures can be taken and planned at the right time. Individual machine components can also be monitored statically and dynamically.

  Функции

  Delivery stages

  SINUMERIK Integrate for production Analyze MyCondition can be delivered in 3 different stages:

  Stage 1: Control monitors

  These can be used to configure triggers that will initiate a specific action. For example, they can be configured to send an email to the machine manufacturer’s organization in response to a specific event.

  Stage 2: Diagnostic data without variable monitors

  In addition to the triggers from stage 1, diagnostics data can be gathered during stage 2 and transmitted to the machine manufacturer’s service organization.

  Stage 3: Advanced maintenance functions

  In addition to the functions from stages 1 and 2, the functions supplied with stage 3 can be used to set up and evaluate event-driven maintenance functions.

  Installation

  Siemens provides the server operation

  Siemens operates the complete infrastructure for Analyze MyCondition. Siemens is responsible for the server and infrastructure operation. Access to the machines is established via a secure Internet connection. This means that Analyze MyCondition facilitates the global and at the same time secure access to the data of a machine tool automated with SINUMERIK.

  The technical implementation of access to the Internet depends on the local conditions at the machine. Access to the Internet can be implemented in different ways. The main requirement is a data transmission rate of at least 64 kbit/s. Depending on the available data transmission rate, some functions may not be executed very quickly or are only available with restrictions.

  Интеграция

  Requirement:

  • SINUMERIK 840D sl with SINUMERIK Operate

  Особенности

  • Designing and optimizing the maintenance measures for your machine
  • Early spare parts disposition through status monitoring and analysis of machine components
  • Provision of a planning service for your customers for preventative or condition-oriented maintenance measures