1PH8 for SINAMICS S120 Combi for machine tools

• Заказные данные
  (22)
• Информационные материалы

  Информационные материалы

  SIMOTICS M-1PH808 spindle motor with forced ventilation

  SIMOTICS M-1PH8 motors are compact squirrel-cage asynchronous motors with degree of protection IP55. SIMOTICS M-1PH8 motors have been designed specifically for use in conjunction with the SINAMICS S120 drive system. Depending on the control requirements, appropriate encoder systems are available for the motors for sensing the motor speed and indirect position.

  The SIMOTICS M-1PH8 spindle motors are perfectly adapted to the SINAMICS S120 Combi drive system.

  Область применения

  • Main spindles for standard milling and turning machines
  • Driven tools for standard turning machines

  Функции

  • Compact asynchronous spindle motors
  • Spindle power: 2.8 to 12 kW
  • Shaft heights: 80 to 132
  • Maximum speed: 24000 rpm
  • Electronic rating plate in motor encoder
  • Integrated, easily replaceable fan
  • Integrated terminal box for power cable
  • DRIVE-CLiQ interface for signal cable
  • IP55 degree of protection (including fan)
  • Vibration severity grade S/A and Special/B
  • High rotational accuracy
  • Optimized bearing design for high cantilever forces

  Чертеж

  ENG_205020.PDF
  ENG_205021.PDF

  Особенности

  • Maximum power over an extremely wide speed range as a result of intelligent winding design and optimized field weakening and heat dissipation concept
  • Very fast spindle acceleration rates and maximum cutting forces thanks to special lamination structure and high overload factor
  • Long-lasting motor bearings for high radial forces with belt drives
  • High degree of protection, including motor fan

  Опции

  Order code	Description
  K23	Special paint finish for "Worldwide" climate group: Primer and paint finish Anthracite RAL 7016

  
  
  

  When ordering a motor with options, -Z should be added to the article number.

  Технические данные

  Product designation	SIMOTICS M-1PH8 motor
  Cooling	Forced ventilation
  Ambient temperature, admissible	-15 ... +40 °C (5 ... 104 °F)
  Temperature monitoring	KTY84 temperature sensor in stator winding
  Insulation of the stator winding in accordance with EN 60034-1 (IEC 60034-1)	For an ambient temperature of up to 40 °C (104 °F)
  1PH808/1PH810/1PH813	Temperature class 180 (H)
  Motor fan ratings
  1PH808	230 V 1 AC ± 10 %, 50 Hz 265 V 1 AC ± 10 %, 60 Hz
  1PH810/1PH813	400 V 3 AC ± 10 %, 50 Hz 480 V 3 AC ± 10 %, 60 Hz
  Encoder system, built-in	DRIVE-CLiQ interface
  1PH8...-1D... for speeds up to 12000 rpm	22 bit incremental encoder (resolution 4194304, internal 2048 S/R) + commutation position 11 bit (IC22DQ encoder)
  1PH8...-1U... for speeds up to 15000 rpm	20 bit incremental encoder (resolution 1048576, internal 512 S/R) without commutation position (IN20DQ encoder)
  1PH8...-1S... for speeds up to 24000 rpm	19 bit incremental encoder (resolution 524288, internal 256 S/R) without commutation position (IN19DQ encoder)
  Sound pressure level LpA (1 m) in accordance with EN ISO 1680 Tolerance + 3 dB	Rated pulse frequency 4 kHz and speed range up to 5000 rpm
  1PH808/1PH810/1PH813	70 dB
  Connection
  1PH808/1PH810/1PH813	Terminal box top/cable entry from right/signal connection DE
  Fan
  1PH808	Power connector
  1PH810/1PH813	Terminals in terminal box
  Encoder system	Connector for signals (without mating connector) or DRIVE-CLiQ
  Vibration severity	In accordance with Siemens/EN 60034-14 (IEC 60034-14)
  Shaft and flange accuracy1)	In accordance with Siemens/DIN 42955 (IEC 60072-1)
  Degree of protection in accordance with EN 60034-5 (IEC 60034-5)
  1PH808/1PH810/1PH813	IP55
  Fan	IP55
  Rating plate	1 unit attached to motor 1 unit supplied loose in terminal box
  Paint finish	Anthracite RAL 7016
  Certificate of suitability	cURus

  
  
  

  ¹⁾ Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.

   

  Terminal box assignment, max. connectable conductor cross-sections

  1PH8 motor Forced ventilation		Terminal box	Cable entry		Outer cable diameter, max.2)	Number of main terminals	Cross-section per terminal, max.	Rated current, max.3)
  Type		Type	Power	External signals
  					mm (in)		mm2	A
  1PH808		gk803	1 × M25 × 1.5	1 × Ø 22 mm4)	20 (0.79)	Phases: 3 × M5 Grounding: 2 × M5	1 × 10	50
  1PH810		gk813	1 × M32 × 1.5	1 × Ø 22 mm4)	24.2 (0.95)	Phases: 3 × M5 Grounding: 2 × M5	1 × 16	66
  1PH810	star/delta	gk826	1 × M32 × 1.5	1 × Ø 22 mm4)	24.2 (0.95)	Phases: 6 × M5 Grounding: 2 × M5	1 × 10	50
  1PH813		gk833	1 × M40 × 1.5	1 × Ø 22 mm4)	32 (1.26)	Phases: 3 × M6 Grounding: 2 × M6	1 × 35	104

  
  
  

  ²⁾ Dependent on the design of the metric cable gland.

  ³⁾ Current-carrying capacity based on EN 60204-1 and IEC 60364-5-52, according to installation type C.

  ⁴⁾ Hole with diameter 22 mm (0.87 in), 90° to signal connection.