- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Системы автоматизации
- Системы визуализации SIMATIC HMI
- Системы идентификации
- Промышленные коммуникации SIMATIC NET
- Промышленные аппараты управления SIRIUS
- Промышленные информационные технологии
- Управление на базе РС
- Системы управления процессом
- Контрольно-измерительные приборы
- Анализаторы процесса
- Блоки питания SITOP
- Продукты для специальных требований
- Модули с расширенным температурным диапазоном SIPLUS
- Системы телеметрии
- IO Systems for heating units
- Automatic door controls
- Condition monitoring systems
- Time synchronization
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
ION SIMATIC TDC T001
- Информационные материалы
Информационные материалы
The ION SIMATIC TDC T001 is a function block for acquiring data from a SIMATIC TDC controller:
- Provision of measured data for further processing in combination with the SIPLUS CMS X‑Tools software (this analysis software must be ordered separately, see "Analysis Software" → "SIPLUS CMS X‑Tools")
- Integrated into the controller user program
- Cyclic data transfer of measured data to the higher-level industrial PC via Ethernet
Область применения
The ION SIMATIC TDC T001 allows numeric data to be read out directly and cyclically from a SIMATIC TDC PLC and transferred to a higher-level industrial PC containing the SIPLUS CMS4000 X-Tools analysis software.
Дизайн
ION SIMATIC TDC T001 consists of two function blocks integrated into the user program of the SIMATIC TDC.
Data is transmitted via an Ethernet connection.
The SIPLUS CMS X-Tools analysis software is installed on the higher-level evaluation PC and is not included in the scope of supply (see "Analysis Software" → "SIPLUS CMS X‑Tools").
Способ действия
The data to be acquired from the SIMATIC TDC is selected by configuring the ION SIMATIC TDC T001 function blocks in the SIMATIC TDC.
Cyclic data exchange with the analysis software on the industrial PC starts after being called by SIPLUS CMS4000 X-Tools. The data is visualized, analyzed and archived there.
From the point of view of SIPLUS CMS4000 X‑Tools, the ION SIMATIC S7‑300 T001 is the Ethernet device that communicates by means of TCP/IP.
Функции
The use of an ION SIMATIC TDC T001 function block enables transmission of max. 250 signals per PLC cycle. If this volume is insufficient, several function blocks can be used in the user program.
Технические данные
Can be loaded online
No
Can be configured in
Alarm tasks, cyclic tasks
Calculated in
Init mode, normal mode
Дальнейшая информация
For further product details, refer to the "ION SIMATIC TDC T001" Manual, http://support.automation.siemens.com/WW/view/en/36814041.