SIMATIC EMS400S PSB-S module

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  

  EMS400S rail signal booster

  The PSB-S (power signal booster segment) module is used for segment control and establishes the communication between it and the cart.

  The module is connected on the right of the S7-1200 as an IO module.

  The PSB-S module can operate 3 rail channels. Up to 8 PSB-S modules can be connected on the right-hand side of the S7-1200 CPU.

  Other interfaces:

  • SYNC input
  • Digital inputs

  Технические данные

  Technical specifications	SIMATIC EMS400S PSB-S module
  Power supply 1
  Rated voltage	24 V DC
  Power consumption, typical	Approx. 0.1 A
  Power supply 2
  Rated voltage	48 V DC
  Power consumption, typical	Approx. 1.9 A
  SYNC input
  Number of inputs	1
  Type	Current-sinking, IEC Type 1
  Rated voltage	24 V
  Digital inputs
  Number of inputs	6, in a group
  Type	Current-sinking, IEC Type 1
  Rated voltage	24 V
  RAIL interface
  Quantity	3
  Type	Differential, 48 V AC, non-isolated from P48 V
  Data rate	16 bits / 250 ms
  Ambient conditions
  Degree of protection
  Front / Rear	IP20
  Ambient temperature
  In operation, vertical installation	0 °C to +45 °C
  In operation, horizontal installation	0 °C to +55 °C
  Relative humidity	10% to 95%, no condensation
  Storage temperature	-40 °C to +70 °C
  Certifications	CE, cULus
  Dimensions
  Dimensions (W x H x D) in mm	70 x 100 x 75
  Weight	Approx. 230 g