SITRANS RD300

• Заказные данные
  (1)
• Аксессуары
  (21)
• Информационные материалы

  Информационные материалы

  

  The SITRANS RD300 is a panel mount remote digital display for process instrumentation and acts as a multi-purpose, easy to use, rate/totalizer ideal for flow rate, total, and control applications.

  Область применения

  The RD300 is a remote display for level, flow, pressure, weighing, and other process instruments. This display also acts as a multi-purpose, easy to use rate/totalizer ideal for flow rate, total, and control applications.

  Data can be remotely collected, logged and presented on your local computer using the free RD software available via USB drive.

  The display accepts a single or dual input of current and voltage. This makes the RD300 an ideal fit for use with most field instruments.

  The RD300 can be set up as a standard panel mount, or combined with optional enclosures to allow it to house up to 6 displays.

  • Key Applications: tank farms, pump alternation control, local or remote display of level, flow, pressure and weighing instrument
    values, PC monitoring and data logging with RD Software.

  Чертеж

  

  SITRANS RD300, dimensions in mm (inch)

  Особенности

  • Easy setup and programming via front panel buttons or using free RD software available via USB drive
  • Display readable in sunlight
  • Input: accepts current and voltage
  • Single or dual 24 V DC transmitter power supply
  • Serial communication using built in protocol or Modbus RTU
  • Supports up to 8 relays and 8 digital I/O for process control and alarming
  • 32-Point linearization, square root or exponential linearization
  • Multi-pump alternation control
  • Supports total, grand total or non-resettable grand total
  • 9-digit totalizer with total overflow feature
  • Large dual-line, 6-digit display
  • Configure, monitor, and datalog from a PC
  • Dual-input option with math functions: addition, difference, average, multiplication, division, minimum, maximum, weighted average, ratio, concentration

  Схема подключения

  

  SITRANS RD300 connections

  Технические данные

  Mode of operation
  Measuring principle	Analog to digital conversion
  Measuring points	1 or 2 instruments
  Input
  Measuring range
  • Current	4 ... 20 mA, 0 ... 20 mA
  • Voltage	0 V DC ... +10 V DC, 1 ... 5 V, 0 ... 5 V
  Output signal
  Output	4 ... 20 mA (optional) Modbus RTU
  Relays	2 or 4 SPDT (Form C) internal and/or 4 SPST (Form A) external; rated 3 A at 30 V DC and 125/250 V AC resistive load; 1/14 HP (50 W) at 125/250 V AC for inductive loads (optional)
  Communications	RS 232 with Modbus RTU RS 422/485 with Modbus RTU USB configuration and monitoring port
  Accuracy
  4 ... 20 mA optional output	± 0.1 % FS ± 0.004 mA
  Process input	± 0.05 % of span ± 1 count, square root: 10 ... 100 % FS
  Rated operating conditions
  Ambient conditions
  Storage temperature range	-40 ... +85 °C (-40 ... +185 °F)
  Operating temperature range	-40 ... +65 °C (-40 ... +149 ºF)
  Design
  Weight	269 g (9.5 oz) (including options)
  Material (enclosure)	1/8 DIN, high impact plastic, UL94V-0, color: gray Optional plastic, steel and stainless steel (Type 304, EN 1.4301) NEMA 4 enclosures
  Degree of protection	Type 4X, NEMA 4X, IP65 (front cover); panel gasket provided
  Electrical connection
  mA output signal	2-core copper conductor, twisted, shielded, 0.82 ... 3.30 mm² (18 ... 12 AWG), Belden 8 760 or equivalent is acceptable
  Electrical connection and relay connection	Copper conductor according to local requirements, rated 3A at 250 V AC
  Power supply
  Input voltage option	85 ... 265 V AC, 50/60 Hz; 90 ... 265 V DC, 20 W max. or jumper selectable 12/24 V DC ± 10 %, 15 W max
  Transmitter power supply	Terminals P+ & P-: 24 V DC ± 10 %, 12/24 V DC powered models selectable for 24, 10, or 5 V DC supply (internal jumper J4), 85 ... 265 V AC models rated at 200 mA max, 12/24 V DC powered models rated at 100 mA max, at 50 mA max for 5 or 10 VDC supply.
  External loop power supply	35 V DC max.
  Output loop resistance	24 V DC, 10 ... 700 Ω max. 35 V DC (external), 100 ... 1 200 Ω max.
  Displays and controls
  Main display	0.6 inch (15 mm) high, red LEDs
  Second display	0.46 inch (12 mm) high, red LEDs, 6-digits: each (-99 999 ... 999 999)
  Memory	Non-volatile Stores settings for minimum of 10 years if power is lost
  Programming	Primary: front panel Secondary: Meter Copy or PC with SITRANS RD Software
  Certificates and approvals	CE, UL, CUL
  Options
  Enclosures	Plastic, steel and stainless steel (Type 304, EN 1.4301) NEMA 4 and 4X enclosures

  
  
  

  Полезное

  ENG_394169.PDF