3-phase, 36 V DC

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  The 3-phase SITOP modular are technology power supplies for sophisticated solutions and offer maximum functionality for use in complex plants and machines. The wide-range input allows connection to almost any electrical power system worldwide and ensures a high degree of safety, even if there are large voltage fluctuations. The power boost provides up to three times the rated current for brief periods. In case of overload, you can choose between constant current with automatic restart or latching shutdown. The high degree of efficiency keeps energy consumption and heating in the control cabinet low, and the compact metal housing also saves space.

  Main product highlights

  • 36 V DC/13 A
  • 3-phase AC input 400 to 500 volts
  • Extremely slim design – no lateral installation clearances required
  • Power Boost with 3 times the rated current (for 25 ms) for tripping protective devices
  • Extra power with 1.5 times the rated current (5 s/min) for brief functional overload
  • Choice of constant current or latching shutdown short-circuit response
  • Optional symmetrical load distribution for parallel operation
  • Operating state on 3 LEDs
  • Extremely high efficiency up to 94%
  • Wide temperature range from -25 to +70 °C
  • Comprehensive certifications, such as cULus, ATEX

  Технические данные

  Order number		6EP3446-8SB10-0AY0
  Product		SITOP PSU8200
  Power supply, type		36 V/13 A
  Input
  Input		3-phase AC
  Rated voltage value Vin rated		400 ... 500 V
  Voltage range AC		320 ... 575 V
  Wide-range input		Yes
  Mains buffering at Iout rated, min.		15 ms; at Vin = 400 V
  Rated line frequency 1		50 Hz
  Rated line frequency 2		60 Hz
  Rated line range		47 ... 63 Hz
  Input current
  ● at rated input voltage 400 V		1.2 A
  ● at rated input voltage 500 V		1 A
  Switch-on current limiting (+25 °C), max.		16 A
  I²t, max.		0.8 A²·s
  Built-in incoming fuse		none
  Protection in the mains power input (IEC 898)		Required: 3-pole connected miniature circuit breaker 6 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
  Output
  Output		Controlled, isolated DC voltage
  Rated voltage Vout DC		36 V
  Total tolerance, static ±		3 %
  Static mains compensation, approx.		0.1 %
  Static load balancing, approx.		0.2 %
  Residual ripple peak-peak, max.		100 mV
  Spikes peak-peak, max. (bandwidth: 20 MHz)		200 mV
  Adjustment range		36 ... 42 V
  Product function Output voltage adjustable		Yes
  Output voltage setting		via potentiometer; max. 480 W
  Status display		Green LED for 36 V OK
  Signaling		Relay contact (NO contact, rating 60 V DC/ 0.3 A) for 36 V OK
  On/off behavior		No overshoot of Vout (soft start)
  Startup delay, max.		2.5 s
  Voltage increase time of the output voltage maximum		500 ms
  Rated current value Iout rated		13 A
  Current range		0 ... 13 A
  ● Note		+60 ... +70 °C: Derating 2%/K
  Supplied active power typical		468 W
  Short-term overload current
  ● at short-circuit during operation typical		39 A
  Duration of overloading capability for excess current
  ● at short-circuit during operation		25 ms
  Constant overload current
  ● on short-circuiting during the start-up typical		14 A
  Parallel switching for enhanced performance		Yes; switchable characteristic
  Numbers of parallel switchable units for enhanced performance		2
  Efficiency
  Efficiency at Vout rated, Iout rated, approx.		94 %
  Power loss at Vout rated, Iout rated, approx.		30 W
  Closed-loop control
  Dynamic mains compensation (Vin rated ±15 %), max.		0.1 %
  Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.		1 %
  Load step setting time 50 to 100%, typ.		0.2 ms
  Load step setting time 100 to 50%, typ.		0.2 ms
  Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.		2 %
  Load step setting time 10 to 90%, typ.		0.2 ms
  Load step setting time 90 to 10%, typ.		0.2 ms
  Setting time maximum		10 ms
  Protection and monitoring
  Output overvoltage protection		< 48 V
  Current limitation, typ.		14 A
  Property of the output Short-circuit proof		Yes
  Short-circuit protection		Alternatively, constant current characteristic approx. 14 A or latching shutdown
  Enduring short circuit current RMS value
  ● typical		14 A
  Overcurrent overload capability in normal operation		overload capability 150 % Iout rated up to 5 s/min
  Overload/short-circuit indicator		LED yellow for "overload", LED red for "latching shutdown"
  Safety
  Primary/secondary isolation		Yes
  Galvanic isolation		Safety extra low output voltage Vout according to EN 60950-1
  Protection class		Class I
  Leakage current
  ● maximum		3.5 mA
  ● typical		0.9 mA
  CE mark		Yes
  UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
  Explosion protection		No
  FM approval		-
  CB approval		Yes
  Marine approval		GL, ABS
  Degree of protection (EN 60529)		IP20
  EMC
  Emitted interference		EN 55022 Class B
  Supply harmonics limitation		EN 61000-3-2
  Noise immunity		EN 61000-6-2
  Operating data
  Ambient temperature
  ● during operation		-25 ... +70 °C
  — Note		with natural convection
  ● during transport		-40 ... +85 °C
  ● during storage		-40 ... +85 °C
  Humidity class according to EN 60721		Climate class 3K3, no condensation
  Mechanics
  Connection technology		screw-type terminals
  Connections
  ● Supply input		L1, L2, L3, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded
  ● Output		+, -: 2 screw terminals each for 0.2 ... 4 mm²
  ● Auxiliary		13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm²; 15, 16 (Remote): 1 screw terminal each for 0.14 ... 1.5 mm²
  Width of the enclosure		70 mm
  Height of the enclosure		125 mm
  Depth of the enclosure		125 mm
  Required spacing
  ● top		50 mm
  ● bottom		50 mm
  ● left		0 mm
  ● right		0 mm
  Weight, approx.		1.2 kg
  Product feature of the enclosure housing for side-by-side mounting		Yes
  Installation		Snaps onto DIN rail EN 60715 35x7.5/15
  Electrical accessories		Buffer module
  Mechanical accessories		Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20
  Other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

  
  

  Дополнительно

  Device labeling plates

  3RT1900-1SB20